Are you stuck with a Galaxy S6 Edge that refuses to turn on due to a faulty power button? Don’t worry, you’re not alone. Many users have faced this issue, and there are ways to revive your device without resorting to a costly repair or replacement. In this article, we’ll guide you through the various methods to turn on your Galaxy S6 Edge without the power button.
Understanding the Power Button Issue
Before we dive into the solutions, it’s essential to understand the reasons behind a faulty power button. The power button, also known as the wake/sleep button, is a crucial component of your Galaxy S6 Edge. It’s responsible for turning your device on and off, as well as waking it up from sleep mode. However, with frequent use, the power button can become worn out or damaged, leading to issues like:
- The power button not responding to presses
- The device not turning on even when fully charged
- The power button becoming stuck or unresponsive
In some cases, the issue might not be with the power button itself but with the underlying hardware or software. Whatever the reason, don’t worry – we’ve got you covered.
Method 1: Using the Volume Down and Home Buttons
One of the most common methods to turn on your Galaxy S6 Edge without the power button is by using the volume down and home buttons. This trick takes advantage of the Android operating system’s built-in functionality to turn on the device using alternative buttons.
Step-by-Step Instructions:
- Press and hold the volume down button located on the left side of your Galaxy S6 Edge.
- While holding the volume down button, press and hold the home button located at the bottom of your device’s screen.
- Hold both buttons for at least 10-15 seconds until your device’s screen turns on.
- Release the buttons once your device boots up successfully.
This method might take some practice, so don’t get discouraged if it doesn’t work on the first try. Make sure to hold the buttons firmly and for the recommended duration.
Method 2: Using the USB Cable and PC
Another way to turn on your Galaxy S6 Edge without the power button is by using your USB cable and a PC. This method takes advantage of the device’s ability to turn on when connected to a computer.
Step-by-Step Instructions:
- Connect your Galaxy S6 Edge to a PC using a USB cable.
- Wait for a few seconds until the PC recognizes your device.
- Your device should automatically turn on once it detects the PC’s power source.
- If your device doesn’t turn on, try pressing the volume down and home buttons simultaneously while it’s connected to the PC.
This method is particularly useful if you’re unable to use the volume down and home button method. Make sure to use a genuine USB cable and a compatible PC to ensure successful connectivity.
Method 3: Using ADB Commands (For Advanced Users)
If you’re comfortable with using Android Debug Bridge (ADB) commands, you can try this method to turn on your Galaxy S6 Edge without the power button. ADB is a powerful tool that allows you to communicate with your Android device from a PC.
Step-by-Step Instructions:
- Download and install the necessary ADB drivers on your PC.
- Enable USB debugging on your Galaxy S6 Edge by going to
Settings > Developer options > USB debugging. - Connect your device to the PC using a USB cable.
- Open a command prompt or terminal window on your PC and navigate to the platform-tools directory.
- Type the command
adb rebootand press Enter to reboot your device.
This method requires some technical expertise, so if you’re not familiar with ADB commands, it’s recommended to stick with the previous methods.
Method 4: Using a Third-Party Button Controller App
There are several third-party apps available on the Google Play Store that can simulate the power button’s functionality. These apps can detect when your device is turned off and allow you to turn it on using an on-screen button or gesture.
Step-by-Step Instructions:
- Download and install a button controller app like
Button MapperorGravity Screenon your Galaxy S6 Edge. - Grant the necessary permissions to the app, including accessibility and device administration.
- Configure the app to simulate the power button’s functionality. This might involve setting up a custom gesture or button combination.
- Once configured, you can use the app to turn on your device when the power button is not working.
Keep in mind that these apps might not work perfectly, and some might require root access. Be cautious when using third-party apps, and make sure to read reviews and terms of service before installing.
Preventing Future Power Button Issues
To avoid facing similar issues in the future, it’s essential to take care of your Galaxy S6 Edge’s power button. Here are some tips to keep your power button in good condition:
- Clean the power button regularly to remove dirt and dust that can cause malfunctions.
- Avoid pressing the power button too hard, as this can cause wear and tear.
- Update your device’s software regularly to ensure you have the latest bug fixes and improvements.
- Consider using a screen protector or case that covers the power button to reduce the risk of damage.
By following these tips, you can reduce the likelihood of your power button malfunctioning and ensure your Galaxy S6 Edge remains functional and reliable.
Conclusion
Turning on your Galaxy S6 Edge without the power button might seem like a daunting task, but it’s not impossible. By using one of the methods mentioned above, you should be able to revive your device and get it up and running again. Remember to take care of your power button to prevent future issues, and don’t hesitate to explore other troubleshooting methods if the problem persists. With a little patience and persistence, you can overcome the power button issue and enjoy your Galaxy S6 Edge once again.
What if my Galaxy S6 Edge’s power button is broken and I can’t turn it on?
If your Galaxy S6 Edge’s power button is broken, it can be frustrating when you’re unable to turn it on. Fortunately, there are a few methods you can try to revive your device. You can try plugging your phone into a charger or a computer using a USB cable. This may prompt your phone to turn on automatically. If that doesn’t work, you can try booting your phone in recovery mode or download mode.
If your phone is still under warranty, you may be able to get it repaired or replaced. However, if your warranty has expired, you may need to visit a repair shop or try to fix it yourself. It’s also a good idea to back up your data regularly to prevent losing important files and information. Make sure to also take good care of your phone to prevent damage to the power button and other components.
How do I boot my Galaxy S6 Edge in recovery mode without the power button?
To boot your Galaxy S6 Edge in recovery mode without the power button, you’ll need to use the volume down and volume up buttons. Press and hold the volume down button, then connect your phone to a charger or a USB cable. Hold the volume down button for about 10-15 seconds until your phone boots into recovery mode. You’ll see a menu with several options, including “Reboot system now” and “Wipe data/factory reset.”
In recovery mode, you’ll be able to perform several actions, including wiping your phone’s data, installing updates, and rebooting your phone. Be careful when using recovery mode, as some actions can erase your data. Make sure to back up your data regularly to prevent losing important files and information.
What is download mode, and how do I use it to turn on my Galaxy S6 Edge?
Download mode, also known as Odin mode, is a special mode that allows you to flash firmware or other files to your phone. To boot your Galaxy S6 Edge in download mode, press and hold the volume down and home buttons, then connect your phone to a USB cable. Hold the buttons for about 10-15 seconds until your phone boots into download mode.
In download mode, you’ll see a warning screen with several options, including “Continue” and “Cancel.” You’ll be able to use software like Odin to install firmware or other files to your phone. Be careful when using download mode, as installing the wrong files can damage your phone. Make sure to only use reputable software and follow instructions carefully.
Can I use a third-party app to turn on my Galaxy S6 Edge without the power button?
There are several third-party apps available that claim to be able to turn on your Galaxy S6 Edge without the power button. However, these apps may not work for everyone and can potentially cause more problems. Some apps may require root access, which can void your warranty and cause security vulnerabilities.
It’s generally recommended to stick with the official methods provided by Samsung or try the recovery mode or download mode methods. These methods are safer and more reliable than using third-party apps. If you do decide to try a third-party app, make sure to read reviews and instructions carefully and use at your own risk.
What if my Galaxy S6 Edge’s power button is damaged due to water or physical damage?
If your Galaxy S6 Edge’s power button is damaged due to water or physical damage, you may need to have it repaired or replaced. You can try to take your phone to a repair shop or contact Samsung’s customer support for assistance. If your phone is still under warranty, you may be able to get it repaired or replaced for free.
However, if your warranty has expired, you may need to pay for repairs. It’s also a good idea to take preventive measures to protect your phone from water and physical damage. You can use a phone case or screen protector to help protect your phone. Make sure to handle your phone with care and avoid exposing it to water or extreme temperatures.
Can I use a replacement power button or fix the existing one myself?
If you’re comfortable with DIY repairs, you can try to replace the power button yourself or fix the existing one. You can purchase replacement parts online or at a repair shop. However, this method can be risky and may void your warranty.
Make sure to follow instructions carefully and take necessary precautions to avoid damaging your phone further. If you’re not comfortable with DIY repairs, it’s recommended to take your phone to a professional repair shop or contact Samsung’s customer support for assistance.
What if my Galaxy S6 Edge is stuck in a boot loop or won’t turn on at all?
If your Galaxy S6 Edge is stuck in a boot loop or won’t turn on at all, there are several things you can try to revive it. First, try booting your phone in recovery mode or download mode using the methods described above. If that doesn’t work, you can try flashing a firmware update or performing a factory reset.
If your phone is still under warranty, you may be able to get it repaired or replaced for free. If your warranty has expired, you may need to pay for repairs. It’s also a good idea to back up your data regularly to prevent losing important files and information. Make sure to also take good care of your phone to prevent damage to the power button and other components.