Easy Steps to Change the Blade on Your Dewalt Miter Saw DWS713

Looking to change the blade on your DeWalt Miter Saw DWS713 but not sure where to start? Whether you are a novice or a seasoned DIY enthusiast, replacing the blade on your miter saw doesn’t have to be a daunting task. With the right guidance, you can tackle this essential maintenance step with confidence and precision.

In this comprehensive guide, we will walk you through the easy steps to change the blade on your DeWalt Miter Saw DWS713, providing detailed instructions and expert tips to help you complete the process efficiently and safely. By following these simple yet crucial procedures, you can ensure that your miter saw operates at its best, delivering accurate and clean cuts for your woodworking projects. Let’s dive in and empower you to take control of your tool maintenance.

Quick Summary
To change the blade on a Dewalt miter saw DWS713, start by unplugging the saw and then loosening the blade bolt with a wrench. After removing the blade bolt and the outer clamp washer, lift off the old blade and replace it with the new one, making sure the teeth are facing in the right direction. Reassemble the outer clamp washer and tighten the blade bolt securely. Double-check the blade’s alignment and then plug the saw back in for testing. Always refer to the saw’s manual for specific instructions.

Gather Necessary Tools And Materials

Before starting the blade change on your Dewalt Miter Saw DWS713, gather the necessary tools and materials to ensure a smooth process. You will need a pair of safety goggles to protect your eyes from any debris, a pair of work gloves for a secure grip while handling the blade, an Allen wrench or a socket wrench to loosen the blade bolt, a blade changing wrench that may be included with your miter saw, and finally, a new replacement blade suitable for your DWS713 saw.

Additionally, it’s recommended to have a sturdy workbench or table to perform the blade change, as well as a clean cloth or brush to remove any dust or debris that may have accumulated on the saw during the process. Having all the required tools and materials organized and within easy reach will streamline the blade-changing process, making it safer and more efficient. By ensuring you have everything you need before getting started, you can minimize the risk of delays or accidents and carry out the blade change with confidence.

Prepare The Miter Saw For Blade Change

To prepare the miter saw for blade change, start by disconnecting the saw from the power source to ensure safety. Next, lower the blade guard housing and the blade guard itself. This will expose the blade nut, allowing you to access and remove the old blade. It’s also a good idea to clean the area surrounding the blade to remove any sawdust or debris that may have accumulated.

Additionally, use a block of wood to secure the blade in place as you loosen and remove the blade nut. This will prevent the blade from moving and make it easier to loosen the nut. Ensure that you have the necessary tools for the job, such as a wrench or blade wrench that fits the blade nut. By following these preparation steps, you can ensure a smooth and safe blade replacement process for your Dewalt Miter Saw DWS713.

Remove The Old Blade

To remove the old blade from your Dewalt Miter Saw DWS713, start by unplugging the saw from the power source to ensure safety. Next, retract the lower blade guard by pushing it upwards and holding it in place. Then, use a wrench to loosen the arbor nut in the center of the blade. You will need to turn the wrench counterclockwise to loosen the nut. It may be necessary to hold the saw blade in place to prevent it from turning while loosening the nut. Once the arbor nut is loose, carefully remove it, followed by the outer washer and inner blade clamp. Keep the parts organized to make reassembly easier.

With the arbor nut, washer, and blade clamp removed, gently lift the old blade out of the saw. Be cautious while handling the sharp blade, and place it in a safe and secure location. After removing the old blade, inspect the arbor and blade guard for any debris or buildup that may affect the installation of the new blade. Clean any dust or residue using a brush or compressed air. Taking these steps will ensure that the installation of the new blade proceeds smoothly and safely.

Install The New Blade

To install the new blade on your Dewalt Miter Saw DWS713, begin by ensuring that the power cord is unplugged from the electrical outlet and the saw head is in the lowered position. Next, use the spindle lock to secure the blade and then place the new blade onto the arbor, making sure that the teeth are facing in the direction of the rotation arrow on the blade guard. Once the blade is correctly positioned, put the blade washer and the blade bolt back in place. Use a wrench to tighten the blade bolt securely, ensuring that the blade is held firmly in position. Then, release the spindle lock, and the new blade is ready for use.

Before inserting the battery or plugging the saw back in, do a final check to ensure that the new blade is securely in place. Raise the saw head and give the new blade a manual spin to ensure that it is not catching on anything and is rotating smoothly. Once everything is in order, the saw is now ready for your next project. Always refer to the user manual for detailed instructions specific to your DWS713 model. With these simple steps, you can easily and safely install a new blade on your Dewalt Miter Saw DWS713, ensuring optimal cutting performance.

Adjust The Blade Tension

To adjust the blade tension on your Dewalt Miter Saw DWS713, start by unplugging the saw from the power source to ensure safety. Next, use a wrench to loosen the bolt holding the blade cover. Once the cover is removed, you can access the tension screw located on top of the blade. Use a screwdriver to tighten or loosen the tension screw as needed. Be sure to refer to the manufacturer’s manual for the recommended tension setting specific to your blade type.

After making the necessary adjustments, replace the blade cover and tighten the bolt securely. It’s crucial to check the tension by gently pushing the blade sideways with your fingers. The blade should have a slight give without feeling loose. Once the tension is adjusted correctly, plug the miter saw back in and proceed with your cutting tasks. Remember, proper blade tension is essential for the safe and efficient operation of your miter saw, so be sure to check it regularly and make adjustments when necessary.

Reassemble The Miter Saw

Once you have successfully changed the blade on your Dewalt Miter Saw DWS713, it’s time to reassemble the tool. Begin by positioning the blade guard back into place, ensuring that it is securely fastened. Next, reconnect the saw’s power supply, making sure the tool is unplugged before doing so.

After reconnecting the power supply, carefully check all the components to ensure they are properly reassembled. Test the saw by running it briefly to confirm that the blade is spinning and functioning correctly. Finally, proceed to adjust any settings or angles on the saw according to your specific cutting requirements.

By following these steps to reassemble your Dewalt Miter Saw DWS713, you’ll ensure that the tool is put back together safely and effectively, ready for your next project.

Perform A Test Run

After successfully replacing the blade on your Dewalt Miter Saw DWS713, it’s essential to conduct a test run to ensure the setup is functioning properly. Prior to making any cuts, activate the saw and allow the blade to run for a few moments. This will help confirm that the blade is securely installed and is spinning smoothly without any unusual sounds or vibrations.

Next, make a few test cuts on scrap wood to observe the performance of the new blade. Check for any irregularities in the cuts, such as jagged edges or burning marks, which could indicate a misalignment or blade installation issue. Additionally, pay attention to the motor and blade housing for any signs of overheating or unusual odors. If everything looks and sounds normal during the test run, you can proceed with confidence to use your Dewalt Miter Saw DWS713 for your intended projects.

Safety Precautions And Final Tips

When it comes to changing the blade on your Dewalt Miter Saw DWS713, safety should be your top priority. Before beginning the process, ensure that the saw is completely powered off and unplugged from the electrical outlet. Also, wear protective gloves and eyewear to prevent injuries from sharp edges and flying debris.

Additionally, take the time to carefully read the user manual for specific instructions and safety precautions related to blade changing. Double-check that all components are securely fastened before starting the saw after replacing the blade. Lastly, keep the work area clean and free of any obstacles to prevent accidents during operation. By adhering to these safety measures, you can ensure a smooth and secure blade replacement process while also safeguarding yourself from potential hazards.

Final Words

In mastering the art of changing the blade on your Dewalt Miter Saw DWS713, you have gained an essential skill that will serve you well in your woodworking endeavors. By following the easy steps outlined in this guide, you can confidently and efficiently replace the blade as needed, ensuring optimal performance and safety. Remember, regular maintenance and care of your tools are crucial to achieving precision and quality in your projects.

As you embark on your woodworking journey, armed with the knowledge and proficiency to change the blade on your Dewalt Miter Saw DWS713, you can approach your projects with confidence and precision. With this essential skill in your repertoire, you are well-equipped to take on a wide array of woodworking tasks, knowing that your equipment is in top condition, and your work will reflect the highest standards of craftsmanship.

Leave a Comment